Learning Center · Activated Sludge

How to Calculate Sludge Volume Index (SVI) and Interpret the Results

Learn the SVI formula, work through an example, and understand what your activated sludge settling test may be telling you.

Sludge Volume Index (SVI) is one of the most useful measurements for evaluating activated sludge settling characteristics. It helps wastewater operators assess how well biological solids settle and identify changes that may affect secondary clarifier performance.

Calculating SVI is straightforward. Interpreting it, however, requires understanding what is happening in the aeration basin and secondary clarifier.

This guide explains the formula, provides a practical example, and discusses what high or low SVI values may indicate.

1. What Is Sludge Volume Index?

SVI measures the volume occupied by one gram of suspended solids after a mixed liquor sample has settled for 30 minutes. It is expressed in milliliters per gram (mL/g).

SVI is calculated using two measurements:

Together, these measurements help operators evaluate the settling characteristics of activated sludge.

A lower SVI generally indicates more compact sludge. A higher SVI indicates that the sludge occupies more volume per gram and may be settling or compacting poorly.

However, neither a high nor a low SVI automatically indicates that a treatment plant is operating improperly.

2. The SVI Formula

SVI (mL/g) = [SSV30 (mL/L) × 1,000] ÷ MLSS (mg/L)

The factor of 1,000 converts the MLSS concentration from milligrams to grams.

For example, if the 30-minute settled sludge volume is 300 mL/L and the MLSS concentration is 3,000 mg/L:

SVI = (300 × 1,000) ÷ 3,000

SVI = 100 mL/g

This means that each gram of mixed liquor suspended solids occupies approximately 100 milliliters after the settling test.

3. Worked Example: Calculate SVI

Consider the following operating data from an activated sludge treatment plant.

MeasurementResult
MLSS2,850 mg/L
30-minute settled sludge volume390 mL/L

Step 1: Write the formula.
SVI = (SSV30 × 1,000) ÷ MLSS

Step 2: Substitute the measurements.
SVI = (390 × 1,000) ÷ 2,850

Step 3: Calculate.
SVI = 390,000 ÷ 2,850
SVI = 136.8 mL/g

Rounded to the nearest whole number, the SVI is 137 mL/g.

This calculation would commonly appear in operator certification examinations. In an operating treatment plant, the next question is what the result means.

4. How to Interpret Your SVI Results

SVI values provide information about sludge settling and compaction, but there is no single ideal value that applies to every wastewater treatment plant.

As a general reference for conventional activated sludge, the following ranges may be useful:

SVI (mL/g)General interpretation
Below 80Relatively compact sludge; investigate unusually low values in context
80–120Often associated with good settling
120–150Moderately elevated; monitor settling performance
Above 150May indicate poor compaction or sludge bulking
These are approximate educational guidelines, not regulatory standards or universal operating targets. Normal SVI varies with the treatment process, wastewater characteristics, operating conditions, and measurement method.

The most useful comparison is often your plant's current SVI against its established operating history.

For example, a plant that normally operates at 90–110 mL/g may warrant investigation if its SVI increases steadily to 160 mL/g, particularly if effluent suspended solids are also increasing.

5. What Can Cause High SVI?

A high SVI indicates that sludge occupies a relatively large volume after settling. Several operating conditions may contribute.

Filamentous organism growth

Excessive filamentous growth can prevent sludge flocs from compacting properly. This may produce sludge bulking and an elevated SVI.

Low dissolved oxygen

Insufficient dissolved oxygen can favor certain filamentous organisms and adversely affect biological treatment.

Changes in sludge age or F/M ratio

Changes in solids retention time (SRT), food-to-microorganism ratio (F/M), and wasting practices can alter microbial populations and floc characteristics.

Wastewater characteristics and nutrient balance

Industrial discharges, changes in organic loading, nutrient deficiencies, and other influent conditions may affect settling performance.

SVI alone cannot establish which of these factors is responsible. Additional measurements and observations are needed.

6. What Should an Operator Check When SVI Increases?

Suppose the SVI at your plant increases from 105 to 165 mL/g over several days. At the same time, the secondary clarifier sludge blanket rises, and effluent TSS increases.

Rather than changing sludge wasting or return activated sludge flow immediately, begin by examining the overall process.

  1. Review the SVI trend. Is the increase gradual or sudden? Confirm that sampling and settling-test procedures are consistent.
  2. Check dissolved oxygen. Compare current aeration-basin DO readings with the plant's normal operating range.
  3. Review MLSS, SRT, and F/M. Determine whether loading, wasting, or biomass concentrations have changed.
  4. Examine sludge characteristics. Look for changes in floc formation, persistent foam, and filamentous organisms when microscopic examination is available.
  5. Evaluate clarifier performance. Review sludge blanket depth, RAS flow, hydraulic loading, and effluent TSS trends.

These measurements can help distinguish biological settling problems from hydraulic or mechanical problems.

Actual process adjustments should follow the facility's standard operating procedures and established operating targets.

7. Common SVI Calculation Mistakes

Forgetting the conversion factor

When MLSS is expressed in mg/L, remember to multiply the settled sludge volume by 1,000.

Using the wrong settling time

SVI is normally calculated using the settled sludge volume after 30 minutes, not after 10 or 60 minutes.

Confusing MLSS with MLVSS

The standard SVI formula uses MLSS, not mixed liquor volatile suspended solids (MLVSS).

Using inconsistent sampling procedures

Use representative mixed liquor samples and a consistent testing method. Differences in settling containers, sample handling, or diluted versus undiluted testing can affect results.

Treating one measurement as a diagnosis

A single SVI value does not establish the cause of a settling problem. Trends and supporting process information are essential.

8. Test Your Understanding

An activated sludge plant reports:

Calculate the SVI. Then consider this question: If the plant's SVI has been steadily increasing and effluent TSS is also rising, what additional operating information would you investigate?

Answer: SVI = (480 × 1,000) ÷ 3,200 = 150 mL/g.

The calculation is only the first step. Understanding the relationship between SVI, biological treatment, and secondary clarifier performance is what makes the measurement valuable.

Practice With Wastewater Skills Lab

Want more practice? Our free trainer includes wastewater math exercises, quizzes, and 30 realistic treatment-plant scenarios.

Practice calculations, review worked solutions, and work through operating situations involving activated sludge settling, dissolved oxygen, nitrification, clarifier performance, and more.

Launch Free Trainer →

Wastewater Skills Lab is an independent educational resource. It is not a substitute for plant-specific operating procedures, regulatory requirements, or supervisory guidance.